iat uno turbo mike spence hormann bmw boston green project
5 posters
Page 1 of 1
iat uno turbo mike spence hormann bmw boston green project
So here it is,
now keep in mind im not going for the complete strip down restore on this car, im making it strong and solid and making it look ok im not going for a show stunner as this will be a everyday use car
so far i got it trailored from birmingham to cambridge
so started by stripping it down
interior, wings boot bumper skirts off#
door off and one resprayed
floor pan was already welded and strong so i just wire wheeled and shutzed it
front turrets plated and covered with stonechip dont get me wrong all rot was completely cut out and welded with fresh metal
front slam panle triangle where the bonnet rubber screws into cut out and replaced
seals are mint
rear turrets mint
spare wheel well wire wheeled and stonchipped then shutzed
roof gutters looked rotton but were actually solid just lots crust on top, roof strips done away with and smoothed and resprayed roof
all around bottom of car undersealed with added waxoyl
all around windscreen ganna be resprayed and looking good
rear inner and outer wings all mint
roof lining is ganna be retrimmed with speaker carpet
15" fondmetal alloys weird ol things
new crank shaft sensor
new speed rpm sensor
new spedo cable
hormann kit was fitted by professionals with a bill from mike spence in 1990 £6400
look through all the pics im nearly at the stage were im ganna put it all back together
just to say this is my first time spraying
i would upload all the pics but this website dont have hosting at takes proper long so there ya go for now until i can be arsed lol
cheers james
now keep in mind im not going for the complete strip down restore on this car, im making it strong and solid and making it look ok im not going for a show stunner as this will be a everyday use car
so far i got it trailored from birmingham to cambridge
so started by stripping it down
interior, wings boot bumper skirts off#
door off and one resprayed
floor pan was already welded and strong so i just wire wheeled and shutzed it
front turrets plated and covered with stonechip dont get me wrong all rot was completely cut out and welded with fresh metal
front slam panle triangle where the bonnet rubber screws into cut out and replaced
seals are mint
rear turrets mint
spare wheel well wire wheeled and stonchipped then shutzed
roof gutters looked rotton but were actually solid just lots crust on top, roof strips done away with and smoothed and resprayed roof
all around bottom of car undersealed with added waxoyl
all around windscreen ganna be resprayed and looking good
rear inner and outer wings all mint
roof lining is ganna be retrimmed with speaker carpet
15" fondmetal alloys weird ol things
new crank shaft sensor
new speed rpm sensor
new spedo cable
hormann kit was fitted by professionals with a bill from mike spence in 1990 £6400
look through all the pics im nearly at the stage were im ganna put it all back together
just to say this is my first time spraying
i would upload all the pics but this website dont have hosting at takes proper long so there ya go for now until i can be arsed lol
cheers james
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
Re: iat uno turbo mike spence hormann bmw boston green project
looks likes you have a lot of work on your hands
st1allstar- Over boosting
- Posts : 539
Join date : 2013-03-01
Age : 39
Location : west mids
Re: iat uno turbo mike spence hormann bmw boston green project
pretty much done now, just need to do front turrets in green then wack it all back togetherst1allstar wrote:looks likes you have a lot of work on your hands
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
Re: iat uno turbo mike spence hormann bmw boston green project
Nice one James will it be ready for retro show.
deltadeano- 3rd gear
- Posts : 72
Join date : 2013-06-17
Age : 55
Location : blackburn lancashire
Re: iat uno turbo mike spence hormann bmw boston green project
OUCH! look at those top mounts! nasty!
Keep up the good work James! It'll make a top daily driver.......but maybe not through winter lol!
Dunc
Keep up the good work James! It'll make a top daily driver.......but maybe not through winter lol!
Dunc
Dunc- 4th gear
- Posts : 160
Join date : 2013-04-03
Re: iat uno turbo mike spence hormann bmw boston green project
yes shell be at the retro show driven by the mrs
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
Re: iat uno turbo mike spence hormann bmw boston green project
also i am very new to welding i done some about 8 years ago and thats it, plus using gasless, these pictures show everything in a real messy state, you will all see it at the retro show anyway but for a 1 month project it aint bad, luckily the car was already solid only the roof gutters and the front turrets
this first picture is how it looked when i first got the car delivered, yeah looks ok but not road legal atall
more pics from progress
this first picture is how it looked when i first got the car delivered, yeah looks ok but not road legal atall
more pics from progress
Last edited by youknowturbo on Sat May 02, 2015 10:47 am; edited 1 time in total
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
Re: iat uno turbo mike spence hormann bmw boston green project
this looks a great project
doody- 5th gear
- Posts : 316
Join date : 2013-02-04
Age : 48
Location : crowland
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
youknowturbo- 4th gear
- Posts : 102
Join date : 2013-06-10
Age : 37
Similar topics
» Uno Turbo Project
» Hormann Mk1 turbo......
» Mk1 HORMANN UNO TURBO ANTISKID
» Ben's uno 1.6 HF turbo project
» Uno Turbo Project
» Hormann Mk1 turbo......
» Mk1 HORMANN UNO TURBO ANTISKID
» Ben's uno 1.6 HF turbo project
» Uno Turbo Project
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum