Turbo Technics S190
2 posters
:: TECHNICAL :: TUNING AND UPGRADES
Page 1 of 1
Turbo Technics S190
Has anyone got any first hand experience of fitting TTS190 to Mk2 uno turbo?
Liam
Liam
Slim- 4th gear
- Posts : 206
Join date : 2013-11-10
Location : Pembrokeshire
Re: Turbo Technics S190
if its just a hybrid turbo then it will fit exactly the same as a standard turbo
st1allstar- Over boosting
- Posts : 539
Join date : 2013-03-01
Age : 39
Location : west mids
Re: Turbo Technics S190
Yeah I thought I may not have written enough/it correctly.
The S190 is Turbo Technics Stage one turbo for the Punto GT. Any fitment info would be good, specifically - will the 90deg elbow be the same as std Mk2 elbow?
More importantly, when it builds boost and what can it hold?
Cheers
The S190 is Turbo Technics Stage one turbo for the Punto GT. Any fitment info would be good, specifically - will the 90deg elbow be the same as std Mk2 elbow?
More importantly, when it builds boost and what can it hold?
Cheers
Slim- 4th gear
- Posts : 206
Join date : 2013-11-10
Location : Pembrokeshire
Re: Turbo Technics S190
it will be just a standard turbo with a larger compressor wheel, it will fit exactly the same as standard so the stock elbow will fit,
from what I remember its just the compressor which is larger and not the exhaust wheel so it will prob be maxed out at 180-190bhp but the spool up will still be good with only a little more lag than standard
the tt stage 2 is a t25 hybrid and is a different turbo but fits the same, apparently its quite laggy and isnt as good as the garret roller bearing turbos
from what I remember its just the compressor which is larger and not the exhaust wheel so it will prob be maxed out at 180-190bhp but the spool up will still be good with only a little more lag than standard
the tt stage 2 is a t25 hybrid and is a different turbo but fits the same, apparently its quite laggy and isnt as good as the garret roller bearing turbos
st1allstar- Over boosting
- Posts : 539
Join date : 2013-03-01
Age : 39
Location : west mids
Re: Turbo Technics S190
Cheers Mark
I still haven't managed to get those brackets packed up and sent yet. Ill send them tomoz.
Cheers
I still haven't managed to get those brackets packed up and sent yet. Ill send them tomoz.
Cheers
Slim- 4th gear
- Posts : 206
Join date : 2013-11-10
Location : Pembrokeshire
Similar topics
» Fiat Uno Turbo mk1 Engine,turbo,gearbox,starter,alternator,afm + both ecu's and both looms £220
» Bought a mk 1 Uno Turbo engine, gearbox, turbo & loom
» Uno turbo Garret t2 turbo wanted!
» MK1 TURBO ENGINE WITH TURBO
» UNO TURBO IE MKI
» Bought a mk 1 Uno Turbo engine, gearbox, turbo & loom
» Uno turbo Garret t2 turbo wanted!
» MK1 TURBO ENGINE WITH TURBO
» UNO TURBO IE MKI
:: TECHNICAL :: TUNING AND UPGRADES
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|