Exhaust/Turbo gaskets

Hi All
I'm after some help i want to replace the exhaust side of the turbo gaskets i have on my Lancia delta Turbo HF 1600 engine fitted to my Fiat x1/9.
I'm drawing a blank both on line and at parts specialists, is there some where someone could recommend that may be able to help?
Its a Garrett T2 turbo and its the two gaskets either side of the small cast iron section bend that connects the turbo to the exhaust

Hi, can try http://www.deltaintegrale.com/details.php?Clv=3&C1=1&C2=8&id=11992
I think theres some on ebay will have a look.
Can you put some pic up to be nice to see, I've got the same engine in my uno

Hi Thanks for quick reply
Will dismantle the pipe later this week and photo
[img][/img]

Its the gasket for both sides of the red cast pipe.
[img][/img]

Ive just ordered one so can let you know if it fits when i get it.

http://www.ebay.co.uk/itm/400109242938?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

How did you get on with the Renault Gasket?

The one they send me is the wrong one but I'm going to make it fit I will have to drill a 8 mm hole in the gesket.
Just got back from holiday and thinks its a bit late to send back.

Thats a pisser, i was thinking about ford because the Garrett T2 turbo was also used on the escort and fiesta turbo

Knock one up in copper, then u won't have to worry about sourcing one again.

Takes some fettling but worth it, then it can be used over & over

What gauge of copper should be used?

1.6 - 2mm will be fine, just be sure its annealed before fitting & torque up straight after.

Thanks