how to fit a tdc sensor
2 posters
:: TECHNICAL :: MAINTENANCE
Page 1 of 1
how to fit a tdc sensor
does anybody know how much gap there should be between the tdc sensor and the crank.because i was told if its not fitted right the car wont run properly
smigz- 2nd gear
- Posts : 33
Join date : 2013-04-16
Re: how to fit a tdc sensor
the haynes manual says 0.4 to 1.0 mm if you need a manual mate there one here says on section 13.14 about the gap
http://www.italpower.cz/data/dokumenty/manualy/fiat/uno/Service_and_repair_manual.pdf
http://www.italpower.cz/data/dokumenty/manualy/fiat/uno/Service_and_repair_manual.pdf
robr33gts- Over boosting
- Posts : 518
Join date : 2013-01-27
Age : 48
Location : lincoln
:: TECHNICAL :: MAINTENANCE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|